Free template

Water bottle label template

A label for a 600 ml PET bottle, for water, juice and kombucha. Set the label size, see it on the bottle in 3D and send your printer a spec pack.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Water Bottle Label, rendered in 3D

At a glance

What it isSelf-adhesive label on a 600ml PET bottle
Made forWater, juice and kombucha
SizingPick the container, then set the label width and height
FinishesFoil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink
DielineBottle and jar label
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Container size

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

ContainerContainer diameterContainer height
Water bottle 600ml (PET)65 mm225 mm

How to read this template

The lines on this template, and what each one means.

Cut line

The outside edge of the pack. Anything past this line is trimmed off.

Bleed

Extend background colours and images to this line so no white edge shows if the cut shifts.

Safe area

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

Before you design

Cold bottles sweat

Condensation lifts paper labels. Ask your printer about a film label and a water resistant adhesive so it stays put in the fridge.

Frequently asked questions

What size is a 600 ml water bottle?

65 mm across and 225 mm tall. Fit the label to the straight section of the bottle.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a water bottle label for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.