Free template

Spirit bottle label template

Labels for gin, whisky and rum on a 700 ml bottle with a bar-top. Design front and back labels, add a finish, and see the bottle in 3D.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Spirit Bottle Label, rendered in 3D

At a glance

What it isSelf-adhesive label on a 700ml bottle with a bar-top
Made forGin, whisky and rum
SizingPick the container, then set the label width and height
FinishesFoil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink
DielineBottle and jar label
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Container size

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

ContainerContainer diameterContainer height
Spirit bottle 700ml78 mm285 mm

How to read this template

The lines on this template, and what each one means.

Cut line

The outside edge of the pack. Anything past this line is trimmed off.

Bleed

Extend background colours and images to this line so no white edge shows if the cut shifts.

Safe area

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

Before you design

Finish where it counts

Spirits sell on shelf presence. Foil, emboss or high build on the name catches the light; keep it to one or two elements so they stand out.

Frequently asked questions

Can I add foil and embossing?

Yes. Labels take gold or silver foil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a spirit bottle label for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.