Free template

Dropper bottle label template

Labels for serums, oils and tinctures on 30 ml and 50 ml glass dropper bottles. The labels are tiny, so check every line in 3D before you print.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Dropper Bottle Label, rendered in 3D

At a glance

What it isSelf-adhesive label on a 30ml or 50ml glass dropper bottle
Made forSerums, oils and tinctures
SizingPick the container, then set the label width and height
FinishesFoil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink
DielineBottle and jar label
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Container sizes

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

ContainerContainer diameterContainer height
Dropper bottle 30ml33 mm72 mm
Dropper bottle 50ml38 mm88 mm

How to read this template

The lines on this template, and what each one means.

Cut line

The outside edge of the pack. Anything past this line is trimmed off.

Bleed

Extend background colours and images to this line so no white edge shows if the cut shifts.

Safe area

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

Before you design

Small label, careful type

A 30 ml dropper is only 33 mm across. Keep the front to the name and product, and test your smallest text on a printed sample.

Frequently asked questions

What size is a 30 ml dropper bottle?

33 mm across and 72 mm tall. The 50 ml is 38 mm across and 88 mm tall.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a dropper bottle label for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.