Free template

Beer label template

Labels for craft beer and cider on a 330 ml stubby or a 500 ml bottle. Set your label size, see it on the bottle in 3D and send your printer a spec pack.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Beer Bottle Label, rendered in 3D

At a glance

What it isSelf-adhesive label on a 330ml stubby or a 500ml bottle
Made forCraft beer and cider
SizingPick the container, then set the label width and height
FinishesFoil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink
DielineBottle and jar label
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Container sizes

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

ContainerContainer diameterContainer height
Beer bottle 330ml (stubby)61 mm215 mm
Beer bottle 500ml70 mm255 mm

How to read this template

The lines on this template, and what each one means.

Cut line

The outside edge of the pack. Anything past this line is trimmed off.

Bleed

Extend background colours and images to this line so no white edge shows if the cut shifts.

Safe area

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

Before you design

Plan the back label

Alcohol content, standard drinks and allergens all need space. Put them on a back label and keep the front for the brand and the beer.

Frequently asked questions

What size is a stubby?

A 330 ml stubby is 61 mm across and 215 mm tall. Fit the label to the straight body below the shoulder.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a beer bottle label for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.