Free template

Spice jar label template

A label for a tall 100 ml spice jar, for spices, rubs and salts. Design one look for the range, change the name for each blend, and check it in 3D.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Spice Jar Label, rendered in 3D

At a glance

What it isSelf-adhesive label on a tall 100ml spice jar
Made forSpices, rubs and salts
SizingPick the container, then set the label width and height
FinishesFoil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink
DielineBottle and jar label
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Container size

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

ContainerContainer diameterContainer height
Spice jar 100ml43 mm100 mm

How to read this template

The lines on this template, and what each one means.

Cut line

The outside edge of the pack. Anything past this line is trimmed off.

Bleed

Extend background colours and images to this line so no white edge shows if the cut shifts.

Safe area

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

Before you design

Make the name easy to find

Spice jars are 43 mm across and sit in a row. Set the blend name large and high so people spot it from the front of the rack.

Frequently asked questions

What size is a 100 ml spice jar?

43 mm across and 100 mm tall. Fit your label to the straight body.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a spice jar label for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.