Flat bottom pouch template
A box pouch with a square base and side gussets, for coffee, tea and protein. Design all five panels on a template with the seal zones, bleed and safe area marked.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | Box pouch with a square base and side gussets |
|---|---|
| Made for | Coffee, tea and protein |
| Sizing | Preset sizes; pick the closest one in the editor |
| Dieline | Stand-up pouch |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Flat-bottom pouch size
The size Packaroo offers for this type, in mm. Pick it in the editor and start designing.
| Size | Holds | Width | Height (flat) | Gusset |
|---|---|---|---|---|
| Flat-bottom pouch 250g | Coffee beans | 110 mm | 230 mm | 70 mm |
How to read this template
The lines on this template, and what each one means.
The outside edge of the pack. Anything past this line is trimmed off.
Where the board or film folds. Keep text and logos a few millimetres away so they do not land on a crease.
Extend background colours and images to this line so no white edge shows if the cut shifts.
Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.
Before you design
Use the gussets
The side gussets face the shopper when the pouch sits sideways on a shelf. Put the name or a flavour band there so the pack reads from any angle.
Frequently asked questions
Flat bottom or stand-up pouch?
A flat bottom pouch stands square like a box and shows five panels. A stand-up pouch has a round base and two main faces.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a flat-bottom pouch for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.



