Bags and pouches

Pet food bag packaging

A big flat-bottom pouch, 1.8 kg, for dry pet food and treats. It stands square on the shelf and gives you five panels to design.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Pet Food Bag, rendered in 3D

At a glance

What it isA big flat-bottom pouch, 1.8kg
Made forDry pet food and treats
SizingPreset sizes; pick the closest one in the editor
DielineStand-up pouch
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Pet food bag size

The size Packaroo offers for this type, in mm. Pick it in the editor and start designing.

SizeHoldsWidthHeight (flat)Gusset
Flat-bottom pouch 1.8kgDry pet food229 mm330 mm102 mm

Before you design

Give every panel a job

Front for the brand and the pet, back for your story and the feeding guide, side gussets for ingredients and analysis. Check each panel in 3D.

Frequently asked questions

What size is a 1.8 kg pet food bag?

This one is 229 mm wide and 330 mm tall flat, with a 102 mm gusset.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a pet food bag for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.