Coffee bag template
A quad-seal, side-gusset coffee bag in 250 g, 500 g and 1 kg. Design the front, back and gussets, then see the bag in 3D before you print.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | Quad-seal coffee bag, folds flat at the bottom |
|---|---|
| Made for | Coffee beans |
| Sizing | Preset sizes; pick the closest one in the editor |
| Dieline | Stand-up pouch |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Side-gusset coffee bag sizes
The sizes Packaroo offers for this type, in mm. Pick it in the editor and start designing.
| Size | Holds | Width | Height (flat) | Gusset |
|---|---|---|---|---|
| Side-gusset bag 250g | Coffee beans | 80 mm | 250 mm | 64 mm |
| Side-gusset bag 500g | Coffee beans | 90 mm | 320 mm | 60 mm |
| Side-gusset bag 1kg | Coffee beans | 135 mm | 360 mm | 70 mm |
How to read this template
The lines on this template, and what each one means.
The outside edge of the pack. Anything past this line is trimmed off.
Where the board or film folds. Keep text and logos a few millimetres away so they do not land on a crease.
Extend background colours and images to this line so no white edge shows if the cut shifts.
Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.
Before you design
Leave room for the valve
Freshly roasted beans need a one-way valve. Ask your supplier where it sits on the bag and keep text and logos clear of that spot.
Frequently asked questions
Which coffee bag size do I need?
250 g is 80 x 250 mm flat, 500 g is 90 x 320 mm and 1 kg is 135 x 360 mm. Pick the size in the editor.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a side-gusset coffee bag for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.



