Subscription box packaging
The box your subscribers open every month. A roll-end mailer sized for a kit, with artwork outside for the doorstep and inside for the moment the lid lifts.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A roll-end mailer sized for a kit, printed inside and out |
|---|---|
| Made for | Monthly boxes and kits |
| Style | FEFCO 0427 |
| Sizing | Any inside size; the dieline redraws as you type |
| Finishes | Gold foil, silver foil and spot gloss |
| Dieline | Mailer box |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Subscription box size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | B flute | 220 mm | 300 mm | 90 mm |
Before you design
Design the inside too
The inside of the lid is the first thing a subscriber sees. Put a thank-you line or a pattern there, and turn the box in 3D to check both sides before you send files.
Frequently asked questions
Can I print inside the box?
Yes. Design the inside as well as the outside. When your design has inside artwork, the spec pack includes it for your printer.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a subscription box for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.

