Letterbox mailer boxes
A slim roll-end mailer that slips through the letterbox, so your customer gets the parcel even when nobody is home. Design it on a real dieline and see it fold in 3D.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A slim roll-end mailer, no one home needed |
|---|---|
| Made for | Fits through a letterbox |
| Style | FEFCO 0427 |
| Sizing | Any inside size; the dieline redraws as you type |
| Finishes | Gold foil, silver foil and spot gloss |
| Dieline | Mailer box |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Letterbox mailer size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | E flute | 160 mm | 220 mm | 35 mm |
Before you design
Check the depth
Australia Post treats anything over 20 mm thick as a parcel. This mailer starts at 35 mm deep inside, so measure your product wrapped and keep the depth as low as you can.
Frequently asked questions
Will it fit through a letterbox?
It is sized for a typical letterbox slot, at 160 x 220 x 35 mm inside. Slots vary, so post a printed sample through a real letterbox before a big run.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a letterbox mailer for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.

