Wine bottle shipping box
A tall shipping carton for one 750 ml bottle. Brand the outside for the delivery, and size the inside to leave room for the insert that holds the bottle still.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A tall shipping carton for a single 750ml bottle |
|---|---|
| Made for | One bottle, posted |
| Style | Regular slotted (FEFCO 0201) |
| Sizing | Any inside size; the dieline redraws as you type |
| Dieline | Shipping box |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Wine bottle shipper size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | B flute | 100 mm | 100 mm | 340 mm |
Before you design
Leave room for the insert
A Bordeaux bottle is 76 to 82 mm wide and 300 mm tall. The 100 x 100 x 340 mm starting size leaves room for an insert; confirm it with your supplier first.
Frequently asked questions
Is this box strong enough to post wine?
That depends on the board, the insert and the courier. The box starts in B flute; ask your supplier to confirm the grade and test a packed sample.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a wine bottle shipper for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.
