Supplement box packaging
A reverse tuck carton for a vitamin or capsule bottle, with four panels for the claims, directions and facts panel your market asks for.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A reverse tuck carton for a pill bottle |
|---|---|
| Made for | Vitamins and capsules |
| Style | Reverse tuck end |
| Sizing | Any inside size; the dieline redraws as you type |
| Finishes | Gold foil, silver foil and spot gloss |
| Dieline | Reverse tuck end carton |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Supplement box size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | 350gsm artboard | 60 mm | 60 mm | 115 mm |
Before you design
Lay out the facts panel first
Directions, warnings and the facts panel take the most space. Place them first, keep them inside the safe area, then design the front.
Frequently asked questions
What size box for a 120 capsule bottle?
A 120 capsule bottle is about 55 mm across and 105 mm tall. Start at 60 x 60 x 115 mm inside and adjust to your bottle.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a supplement box for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.


