Mascara box packaging
A slim, tall reverse tuck carton for mascara and liners. Narrow panels need tight layouts, so design on the real dieline and check every face in 3D.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A slim tall reverse tuck carton |
|---|---|
| Made for | Mascara and liners |
| Style | Reverse tuck end |
| Sizing | Any inside size; the dieline redraws as you type |
| Finishes | Gold foil, silver foil and spot gloss |
| Dieline | Reverse tuck end carton |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Mascara box size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | 350gsm artboard | 28 mm | 28 mm | 125 mm |
Before you design
Run the name up the panel
At 28 mm wide, the front is narrow. Setting the name vertically along the tall panel often reads better; preview both ways in 3D.
Frequently asked questions
What size is a mascara box?
A mascara tube is about 22 mm across and 115 mm tall, so 28 x 28 x 125 mm inside is a good start.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a mascara box for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.


