Beauty and cosmetics

Soap box packaging

A small tuck end carton for bar soap and bath bombs. Put the scent on the front and the ingredients on the back, then turn it in 3D before you print.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Soap Box, rendered in 3D

At a glance

What it isA small tuck end carton for a bar
Made forBar soap and bath bombs
StyleStraight tuck end
SizingAny inside size; the dieline redraws as you type
FinishesGold foil, silver foil and spot gloss
DielineFolding carton
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Soap box size

A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.

SizeBoardInside lengthInside widthInside height
Typical size350gsm artboard95 mm65 mm32 mm

Before you design

Measure the bar, then add a little

A 100 g bar is about 90 x 60 x 28 mm. A 95 x 65 x 32 mm inside size lets it slide in and out without the carton bulging.

Frequently asked questions

What board is best for a soap box?

This box starts on 350 gsm artboard, which suits a light bar. Natural oils can mark plain board, so ask your printer about a coating.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a soap box for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.