Custom shoe box design
A lid and base shoe box, the style footwear brands use on shelves and in stockrooms. Design both parts and check them together in 3D.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | Lid and base, the shoe box |
|---|---|
| Made for | Footwear |
| Style | FEFCO 0300 |
| Sizing | Any inside size; the dieline redraws as you type |
| Dieline | Telescope box |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Shoe box size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height | Lid height |
|---|---|---|---|---|---|
| Typical size | E flute | 330 mm | 200 mm | 120 mm | 40 mm |
Before you design
The lid and end panel do the work
In a stack, people see the lid and the short end. Put the logo on the lid and the style and size on the end panel, where staff read them.
Frequently asked questions
What size is a standard shoe box?
A typical adult shoe box is about 330 x 200 x 120 mm inside with a 40 mm lid. Boots and kids’ shoes differ, so set your own size in the editor.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a shoe box for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.