Donut box design
A long, shallow bakery box with a window, for half a dozen donuts. Brand the lid, let the glaze do the selling, and see it in 3D before you print.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

At a glance
| What it is | A long, shallow bakery box with a window |
|---|---|
| Made for | Half a dozen donuts |
| Sizing | Any inside size; the dieline redraws as you type |
| Dieline | Cake box |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |
Donut box size
A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| Typical size | 400gsm artboard | 300 mm | 200 mm | 75 mm |
Before you design
Two rows of three
Six donuts sit in two rows of three, so this box starts at 300 x 200 x 75 mm inside. For a dozen, double the length and ask your supplier about board.
Frequently asked questions
What board is a donut box made from?
It starts on 400 gsm artboard. Glaze and icing are sticky and oily, so ask your supplier about a food safe coating.
What do I send my printer?
A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.
Can I design a donut box for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.


