Food and takeaway

Chip box packaging

The small clamshell for chips, fries and nuggets. Brand it once and every side order carries your name out the door.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

Chip Box, rendered in 3D

At a glance

What it isThe small clamshell, for a side
Made forChips, fries and nuggets
SizingAny inside size; the dieline redraws as you type
DielineBurger box
FilesA spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF

Chip box size

A starting size from Packaroo’s presets, inside dimensions in mm. Type your own size and the dieline redraws as you type.

SizeBoardInside lengthInside widthInside heightLid depth
Snack box350gsm artboard150 mm100 mm40 mm40 mm

Before you design

Plan for grease

Hot, oily food can show through board. Ask your supplier about a grease resistant board or coating, and keep fine text off the base.

Frequently asked questions

What size is a chip box?

This snack box starts at 150 x 100 x 40 mm inside with a 40 mm lid, on 350 gsm artboard. Set your own size in the editor.

What do I send my printer?

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

Can I design a chip box for free?

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see plans.