Pizza box dieline template
A pizza box is a shallow corrugated box with lock corners and a tuck-in lid. Packaroo has 7, 9, 11 and 13 inch sizes, or set your own inside size and check the box in 3D.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.
Standard sizes
Inside sizes in mm. Type your own in the editor. These are working sizes; confirm the exact spec with your supplier.
| Size | Board | Inside length | Inside width | Inside height |
|---|---|---|---|---|
| 7 inch | E | 180 mm | 180 mm | 40 mm |
| 9 inch | E | 230 mm | 230 mm | 40 mm |
| 11 inch | E | 280 mm | 280 mm | 45 mm |
| 13 inch | B | 330 mm | 330 mm | 45 mm |
Start with 3 mm (1/8 in) bleed; your printer’s own spec wins.
How to read this dieline
The line types on this dieline, and what each one means.
The outside edge of the pack. Anything past this line is trimmed off.
Extend background colours and images to this line so no white edge shows if the cut shifts.
Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.
Before you design
Printing on corrugated
The lid is the main print face. Corrugated board takes bold shapes and large type better than fine detail, so keep thin lines and small text to a minimum.
Board
The presets use E flute up to 11 inch and B flute for 13 inch. Your supplier confirms the board.
Frequently asked questions
Which pizza box size do I need?
The 7, 9, 11 and 13 inch presets are 180, 230, 280 and 330 mm square inside. If your pizza runs larger, set a custom inside size in the editor.
Can I design on this template for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. The spec pack is A$15, or included in Pro and Pro Max.