Paper bowl template
A paper bowl is a round kraft or white board bowl for soup, salad and poke. Packaroo has 500, 750 and 1000 ml sizes. The template is the printed wrap round the bowl wall.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.
Sizes
The sizes Packaroo offers for this format. Pick the closest one when you open it in the editor. These are working sizes; confirm the exact spec with your supplier.
| Size | Rim diameter | Base diameter | Height | Wrap width |
|---|---|---|---|---|
| 500ml | 150 mm | 100 mm | 55 mm | 392.7 mm |
| 750ml | 165 mm | 110 mm | 65 mm | 432 mm |
| 1000ml | 185 mm | 115 mm | 75 mm | 471.2 mm |
Start with 3 mm (1/8 in) bleed; your printer’s own spec wins.
How to read this dieline
The line types on this dieline, and what each one means.
The outside edge of the pack. Anything past this line is trimmed off.
Extend background colours and images to this line so no white edge shows if the cut shifts.
Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.
Before you design
An arc, not a rectangle
The bowl wall tapers, so the flat wrap is a wide arc. Straight text tilts once wrapped, so check it on the bowl in 3D.
Kraft or white
Colours print darker on kraft board than on white board. Ask your supplier for a printed sample before a full run.
Frequently asked questions
What sizes are the paper bowls?
500 ml with a 150 mm rim, 750 ml with a 165 mm rim and 1000 ml with a 185 mm rim. Pick the closest when you open it in the editor.
Can I design on this template for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. The spec pack is A$15, or included in Pro and Pro Max.