Coffee cup sleeve template
A coffee cup sleeve is the fluted band that wraps a hot takeaway cup. Packaroo has two sizes for 90 mm rim cups: a small sleeve for 8 oz and a universal sleeve for 12 and 16 oz cups.
Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.
Sizes
The sizes Packaroo offers for this format. Pick the closest one when you open it in the editor. These are working sizes; confirm the exact spec with your supplier.
| Size | Rim diameter | Base diameter | Height | Wrap width |
|---|---|---|---|---|
| Small · fits the 8 oz cup | 89 mm | 65 mm | 55 mm | 241.9 mm |
| Universal · fits the 12 and 16 oz cups | 90 mm | 73 mm | 60 mm | 256 mm |
Start with 3 mm (1/8 in) bleed; your printer’s own spec wins.
How to read this dieline
The line types on this dieline, and what each one means.
The outside edge of the pack. Anything past this line is trimmed off.
Extend background colours and images to this line so no white edge shows if the cut shifts.
Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.
Before you design
A curved wrap
The sleeve tapers, so the flat template is an arc, not a rectangle. Text set straight across the arc tilts once wrapped, so check it on the cup in 3D.
The seam
The two ends overlap where the sleeve is joined. Keep logos away from the join.
Frequently asked questions
Will one sleeve fit my 12 and 16 oz cups?
Yes, if they share a 90 mm rim. The universal sleeve fits Packaroo’s 12 and 16 oz paper cups; the small sleeve fits the 8 oz cup.
Can I design on this template for free?
Yes. The free plan covers designing and 3D previews, with 3 downloads. The spec pack is A$15, or included in Pro and Pro Max.