# Water bottle label template

> A free label template for a 600 ml PET bottle, for water, juice and kombucha. See it on the bottle in 3D and export a spec pack.

Canonical: https://packaroo.design/templates/water-bottle-label-template
Updated: 2026-11-14

Free template

A label for a 600 ml PET bottle, for water, juice and kombucha. Set the label size, see it on the bottle in 3D and send your printer a spec pack.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

[Design your water bottle label](https://app.packaroo.design/auth/signup?ref=templates%3Awater-bottle-label)

## At a glance

| What it is | Self-adhesive label on a 600ml PET bottle |
| --- | --- |
| Made for | Water, juice and kombucha |
| Sizing | Pick the container, then set the label width and height |
| Finishes | [Foil, spot gloss, emboss, deboss, high build, spot matte varnish and metallic ink](https://packaroo.design/finishes) |
| Dieline | [Bottle and jar label](https://packaroo.design/templates/product-label-template) |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |

## Container size

Container sizes in mm, not label sizes. Pick the container in the editor, then set your label. Start with 3 mm bleed; your printer’s spec wins.

| Container | Container diameter | Container height |
| --- | --- | --- |
| Water bottle 600ml (PET) | 65 mm | 225 mm |

## How to read this template

The lines on this template, and what each one means.

**Cut line**

The outside edge of the pack. Anything past this line is trimmed off.

**Bleed**

Extend background colours and images to this line so no white edge shows if the cut shifts.

**Safe area**

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

## Before you design

### Cold bottles sweat

Condensation lifts paper labels. Ask your printer about a film label and a water resistant adhesive so it stays put in the fridge.

## Frequently asked questions

**What size is a 600 ml water bottle?**

65 mm across and 225 mm tall. Fit the label to the straight section of the bottle.

**What do I send my printer?**

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

**Can I design a water bottle label for free?**

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see [plans](https://packaroo.design/pricing).

## Related

- [Bottle and jar label template](https://packaroo.design/templates/product-label-template): Labels for wine bottles, jars and pump jars.
- [All labels](https://packaroo.design/labels)
- [All fmcg and grocery](https://packaroo.design/grocery-packaging)
- [Jar Label](https://packaroo.design/templates/jar-label-template): Self-adhesive label round a glass jar
- [Pump Jar Label](https://packaroo.design/templates/pump-jar-label-template): Self-adhesive label on a cosmetic pump jar
- [Beer Bottle Label](https://packaroo.design/templates/beer-label-template): Self-adhesive label on a 330ml stubby or a 500ml bottle
- [Spirit Bottle Label](https://packaroo.design/templates/spirit-label-template): Self-adhesive label on a 700ml bottle with a bar-top
