# Flat bottom pouch template

> A flat bottom pouch template for coffee, tea and protein, with seal and gusset areas marked. Design all five panels and check it in 3D.

Canonical: https://packaroo.design/templates/flat-bottom-pouch-dieline
Updated: 2026-11-14

Free template

A box pouch with a square base and side gussets, for coffee, tea and protein. Design all five panels on a template with the seal zones, bleed and safe area marked.

Every design exports as a spec pack your printer can quote from: layered dieline, 3D renders, spec sheet and prepress report.

[Design your flat-bottom pouch](https://app.packaroo.design/auth/signup?ref=templates%3Aflat-bottom-pouch)

## At a glance

| What it is | Box pouch with a square base and side gussets |
| --- | --- |
| Made for | Coffee, tea and protein |
| Sizing | Preset sizes; pick the closest one in the editor |
| Dieline | [Stand-up pouch](https://packaroo.design/templates/stand-up-pouch-dieline) |
| Files | A spec pack with the dieline, 3D renders, spec sheet, prepress report, .ai and CMYK PDF |

## Flat-bottom pouch size

The size Packaroo offers for this type, in mm. Pick it in the editor and start designing.

| Size | Holds | Width | Height (flat) | Gusset |
| --- | --- | --- | --- | --- |
| Flat-bottom pouch 250g | Coffee beans | 110 mm | 230 mm | 70 mm |

## How to read this template

The lines on this template, and what each one means.

**Cut line**

The outside edge of the pack. Anything past this line is trimmed off.

**Fold line**

Where the board or film folds. Keep text and logos a few millimetres away so they do not land on a crease.

**Bleed**

Extend background colours and images to this line so no white edge shows if the cut shifts.

**Safe area**

Keep text, barcodes and logos inside this line. 3 to 5 mm inside the cut is a common starting point.

## Before you design

### Use the gussets

The side gussets face the shopper when the pouch sits sideways on a shelf. Put the name or a flavour band there so the pack reads from any angle.

## Frequently asked questions

**Flat bottom or stand-up pouch?**

A flat bottom pouch stands square like a box and shows five panels. A [stand-up pouch](https://packaroo.design/templates/stand-up-pouch-dieline) has a round base and two main faces.

**What do I send my printer?**

A spec pack: your artwork on the dieline, a 1:1 dieline, 3D renders, a spec sheet and a prepress report.

**Can I design a flat-bottom pouch for free?**

Yes. The free plan covers designing and 3D previews, with 3 downloads. Buy a spec pack when your printer needs files, or see [plans](https://packaroo.design/pricing).

## Related

- [Stand-up pouch dieline](https://packaroo.design/templates/stand-up-pouch-dieline): Coffee, snacks and pet food doypacks.
- [All bags and pouches](https://packaroo.design/bags-and-pouches)
- [All food and takeaway](https://packaroo.design/food-packaging)
- [Side-gusset Coffee Bag](https://packaroo.design/templates/coffee-bag-template): Quad-seal coffee bag, folds flat at the bottom
- [Sachet](https://packaroo.design/packaging/sachet): Flat pouch sealed on three sides
- [Pet Food Bag](https://packaroo.design/packaging/pet-food-bag): A big flat-bottom pouch, 1.8kg
- [Protein Pouch](https://packaroo.design/packaging/protein-pouch): A flat-bottom pouch, 500g
