# What is bleed in packaging?

> Bleed is extra artwork that runs past the cut line, usually 3 mm (1/8 in).

Canonical: https://packaroo.design/glossary/bleed
Updated: 2026-11-14

Packaging glossary

Bleed is extra artwork that runs past the cut line, usually 3 mm (1/8 in). If the cut lands slightly off, the edge of the pack shows your colour instead of a thin white line.

## What it means for your design

Extend backgrounds, photos and colour blocks to the bleed line. Text and logos do not belong there; they go inside the safe area. Some printers ask for more bleed on corrugated board or large formats, so check their spec.

## In Packaroo

Bleed is marked on every Packaroo dieline, so you can see exactly how far backgrounds need to reach.

[Start a design free](https://app.packaroo.design/auth/signup?ref=glossary%3Ableed)

Related terms: [Safe area](https://packaroo.design/glossary/safe-area) · [Cut line](https://packaroo.design/glossary/cut-line) · [Prepress](https://packaroo.design/glossary/prepress)

Read more: [Bleed vs safe area](https://packaroo.design/blog/bleed-vs-safe-area-packaging)

[All packaging terms](https://packaroo.design/glossary)
